|
Batch |
Continuous |
Draw/Temper |
Generators |
Induction |
VacuumFurnaces |
VacuumPumps |
LeakDetectors |
Testing |
Salt |
Miscellaneous
See something you need, click on the link or
scroll through all the items for sale.
Searching for something we don't have listed, fill out our
contact form.
Item #B240
Tempering Oven. Car Bottom Style Draw Furnace. Working dimensions of
21’6” long X 5’ wide X 4’ high. Built in 1978. Operating temperature of
1400F. Two direct fired burners, 1 million BTU’s each firing into a “hot
box”. 2 recirculating fans in the roof. Controls are RKC, Johnson and
Honeywell. Interior is fibre board covered with SS sheet. 575V, 30 amp, 3
phase. Temperature uniformity is 10-15+-. Currently installed and in
operation. Asking $35,000. 
 
Item #B239
Tempering Oven. Car Bottom Style Draw Furnace. 1995 vintage, working
dimensions of 12’ deep X 5’ wide X 4’ high. 1 one million BTU direct fired
burner firing into a “hot box”. Interior is fibre board covered in SS sheet.
1 recirculating fan. Capable of a 10,000 pound load. Currently installed but
not in use. Requires a new controller. Asking $20,000.
Item #B238
Harper Box Atmosphere Furnace. Well below value for quick sale.
Harper Box Atmosphere Furnace,
Type: “ARG”, Electric with Globar Heating Elements, 500-2400°F Range, Was
being used with Argon, but could be any inert gas, Work Zone: 24”W x 20”D x
36”H Price: 1,800 for quick sale Immediate Availability. Location: Portland,
OR
Item #B237
Custom Hydrogen Atmosphere Bell Furnace. Excellent for small brazing
jobs, 2250°F, 14" Diameter x 18" High Work Zone, Electric, 230V/2 Phase, FLA
75, Water-cooled base & Retort Flange, Furnace Outside Dimension is 34" Dia.
x 36"H, Pad is 28" Dia. x 10"H, \Overall is 34" Dia. x 48"H. Single Zone of
Control, Control Penel includes Honeywell Chart Recorder and Honeywell UDC
Control/Overtemp, Great unit that needs minor work. Good overall condition.
Price: $4,800 Location: West Coast U.S.
Item #B236
Carbottom Furnace. This 25 year old OSI Manufactured furnace
has a work zone of 49"w x 66"L x 70"H. Elements need to be
verified. Door operation poor. Overall condition fair. Asking
Price: 8,000US 
Item #B235
Ipsen T-4 Atmosphere Integral Quench Furnace (standard height). 1960
Ipsen Model T-4-600-CGM Endo Atmosphere Integral Quench Furnace, previously
certified for doing Boeing work, work zone: 24"W x 36"D x 18"H, 1750°F,
Gas-Fired Radiant Tubes, Has recently had new alloy burner tubes, new brick
and new ceramic hearth. Overall Footprint: 7'W x 15'6"L x approx. 12'H, No
Pit Needed. Pyronics burner control, Carbon Control. Operational. Location:
Pacific Northwest Asking Price: $13,900.00US
Item #B232 Despatch
Car Bottom Oven. Working dimensions of 10” 6” wide X 50’ long X 10’
high. Outside dimensions of 18’ wide X 51’ 4” long X 17’ 3” high. Gas fired with
a maximum operating temperature of 1250F. 480V/3ph/60cycle. Furnace is fibre
lined with 2 zones of control. Two doors, one at either end and two cars. Free
standing control panel with Cutler Hammer Panel Mate PLC Controller, Chessell
digital round strip chard recorder, Honeywell digital overtemps. Excellent
condition! Asking price: $137,500.00US.
Item #B231
Lindberg Atmosphere Integral Quench Furnace.
Lindberg, Model 13-CT-243618-18AQ-2 Atmosphere Integral Quench Furnace, In/Out
Design, Electric Radiant Tube Design, 65kW, Surveyed Range: 1200°F to 1850°F,
Carbon Control System, Quench Oil Cooler, Quench Oil Heater, Rapid Recovery
(from cold to temperature in 2-1/2 hours), Controls: West 6700 and West 6100,
Truline Chart Recorder, Overall Footprint: Approx. 9-1/2ftW x 13-1/2Ft L x
10ft-10"H No Pit is Needed, Recently Re-bricked, Operational for Demonstration
Price: $25,000US Will be painted before removal for shipment.
Item #B230 PKM-75
Atmosphere IQ Furnace. Pacific Scientific, Model PKM-75GRT, Gas-Fired,
Atmosphere Integral Quench Furnace, Work Zone: 24"W x 36"L x 22"H, 2100°F max.,
Straight Thru design, Eclipse Burners, 615,000 BTU/hr, Quench oil heater, Quench
Oil Cooler, Powered Load Table, Carbon Control System, Quench Oil Filtration,
Dual Gas Cooling Fans, 2-Speed Quench Agitation, Brick Condition: "Good",
Overall Footprint: 8'0"W x 20'L x 10'2"H, No Pit is Needed. Manuals and Drawings
Included. Operational for Demonstration. Price: $39,000US Will be Painted before
shipment.
Item #B228
Sunbeam Atmosphere Integral Quench Furnace. Priced to Sell, Used Sunbeam
Atmosphere Integral Quench Furnace, Work Zone handles approx. 24"Wide x 48"Deep
x 24"High baskets, Automatic Load Transfer, Marathon Monitors "Carbpro" Carbon
Control and Probe Burn-off System, Current owner purchased but never hooked it
up. Some wiring required, and needs mechanical work. Gas-Fired with Recuperated
Burners and U-Tubes, Top Cool Chamber (no fan in top cool), Brick-lined, MMI
Unipro Temperature Control and Quench Oil Temperature Control. Honeywell
Hi-Limit. Chessel Strip Chart Recorder. Door Opening is 28"W x 27"H. Price:
$9,500US Immediate Availability, Location: Northwestern U.S.
Item #B223
Pacific Scientific 500lb. Atmosphere Integral Quench Furnace.
Refurbished 1976 Pacific
Scientific Model PKM-50 Electric Endothermic Atmosphere Integral Quench Furnace,
with top cool capability for loading during gas cool cycle, 76 kVA,
480V/3Ph/60Hz, 1950°F, for Carburizing, Deep Case Hardening, Neutral Hardening
and has enrichment gas addition and control for Carbo-Nitriding. Work zone is
24"w x 36"l x approximately 20"h. It takes a 24" x 36" grid and basket.
Outside dimensions (footprint) are approximately 9'w x 19'l x 11'hl. It
has a stand-alone control cabinet that is 5'w x 7'h x 20"deep. Finally,
the power panels are approximately 5'w x 8'h x 2' deep. 500 lb.
Capacity, with Quench Oil Temperature Control system with heating and cooling of
quench oil (SBS Cooler), Front end loading and unloading with motorized drive
table, Carbon Control System with Honeywell controls and new SSI Gold Probe
oxygen sensor, Brick-Lined and brick is in good condition, Honeywell temperature
control and high limit, operational and can be demonstrated. Approx. 15 spare
heating elements and 6 spare oil heaters. No water cooling (safety issue). All
cooling is done by SBS oil cooler. It is currently set up for using endothermic
gas. It has an endothermic gas flow meter, a natural gas flow meter, an
air flow meter, and an ammonia flow meter for carbonitriding. Price: $14,500US Location: Northwestern U.S.
Item #B218
Surface Combustion Pit Carburizer.
This is a gas fired unit with
working dimensions of 36" X 72". Overall in not bad condition, but all the
instruments are missing and will need to be replaced. Currently located in a
heat treat shop but not installed.
Item #B212A
Ipsen 30" Tall,
Gas-Fired Atmosphere Carburizing Line with Top Cool.
Line #1: Ipsen Model RT-4-GS(30") Gas-Fired,
Radiant Tube Atmosphere Hardening Furnace with additional Top Gas-Cool
Feature. 30" Tall work zone. Work Zone is 24"W x 36"D x 30"H. With In/Out
Single-ended loading and unloading this furnace line requires less floor
space than a straight thru style. Includes Gas-Fired Temper Furnace, Ipsen
Model DLR-4(30")G, SBS oil cooler, misc. alloy grids, baskets & fixtures.
Carbon Control Panel, and a Union Carbide Nitrogen/Methanol Mixing Panel (endo
gas source). Includes a walk-behind Loader Price: $48,000
Item #B212B
Ipsen T-4, 30" Tall Gas-Fired Atmosphere Lines with Top Cool.
Line #2: Ipsen Ipsen Model RT-4-GS(30") Gas-Fired, Radiant Tube Atmosphere
Hardening Furnace with additional Top Gas-Cool Feature. 30" Tall work zone.
Work Zone is 24"W x 36"D x 30"H. With In/Out Single-ended loading and
unloading this furnace line requires less floor space than a straight thru
style. Includes Gas-Fired Temper Furnace, Ipsen Model DLR-4(30")G, SBS oil
cooler, misc. alloy grids, baskets & fixtures. Carbon Control Panel, and a
Union Carbide Nitrogen/Methanol Mixing Panel A few years newer than Line #1.
Includes track loader. Price: $54,000
Item #B204
Batch IQ Furnaces Ipsen Batch IQ Furnaces.
(2 Available). Available
are one Ipsen T-7 with working dimensions of 30" wide X 48" deep X 22" high
and 1 T-8 units with working dimensions of 30" X 48" X 24" high. Both
furnaces are electrically heated, and range from 1982 vintage to 1989,
complete and overall in good condition. Currently they are not installed,
they are packed and braced for shipping which means no rigging costs. Each
comes with an SBS quench oil cooler and the Ipsen "Carboprof" atmosphere
control system. Asking price for each is $35,000 USD.
Item #B190 Blue-M Hot-Cold
Dual Chamber.
Model WSP109C-5. Electrical: 240/1Ph/60hZ. Electric
Fuel. Maximum Temperature: Cold = -75°C TO 0°C Hot = 85°C TO 200°C. Zones:
(2) Hot - Cold. Type of Control: Blue-M Control for hot. Honeywell Diatrol
for Cold. 2 Timers for Hot - Cold. Excellent Condition. Asking Price:
$10,500.00US.
Item #B189
Lindberg Box Furnace.
Model
363624-E14. Working Dimensions: 36" x 36" x 24". Power required: 230 volt
50 kw 3 phase. Temperature range: 1400°F. Description: Box furnace with
brick lined heating chamber and air operated vertical rise door. Spare
elements. This furnace was previously used in an Aerospace company.
Controls: Enclosed panel with Yokogawa UT-15 Temperature controller, Barber
Colman 560 Hi-Limit. Good Condition. Asking Price: $12,500.00US New Price:
$9,500.00US
Item #B181
Dayton Process Retort Furnace
with heat source, retort and lid only. Needs a control system and gas panel.
Max operating temperature 2000 degrees F. Retort size 46" diameter x 51"
deep. Heating elements on sides and bottom. Asking $19,000 US.
Item #B180
VAC AERO Vertical Retort Furnace
with Avesta 253MA retort working size 32" high X 29" diameter. Retort
equipped for vacuum pumping (pump not included). Max operating temperature
2000 degrees F. Water cooled o-ring seal on retort lid. Cooling stand. Power
supply: Hunterdon transformer 150kVA, 3 phase, 60 Hz, primary input voltage
575V. Honeywell DCP700 controller. Gas control: 3 rotometers - one Matheson
0-4 scfm air, two Air Products HA6 0-150 graduation. Attached picture is
when the furnace was in production, the control panel on the right is part
of the system. Capable of Nitrogen or Argon addition. Very good condition.
Asking Price: $19,000US.
Item #B152
Pacific Integral Quench Furnace.
PKM-50-CRT. Work Area: 24"W x 20"H x 36"L. Outside dimensions: 96"W X 135"H
x 360"L. Max. Temp: 1900°F. Controls: Honeywell 2000 & 3000 strip chart.
With carbon control (Accu-Carb) by Furnace Control, dual agitators. New
Price: $19,500US
Item # B144
Accu-Therm / Thermcraft
BHSF-242436-1371 Controlled Atmosphere Heat Treating Furnace.
Temperature Capability: 1400-2500ºF
Temperature Uniformity: +/-
25ºF. Chamber Size: 24" H x 24" W x 36" L. Flame Supervision Interlocks.
Automatic Flame Curtain Using Natural Gas or Propane. Automatic Ignition of
Flame Curtain and Burn-off. Shell made of continuously welded 3/16" plate
steel - front frame of 3/4" steel plate 1-1/2" thick silicon carbide plates
on elevating piers make up the hearth. Wall and roof insulation rated to
2800ºF. New Price: $17,000US
|
