|
Batch
|
Continuous
|
Draw/Temper
|
Generators
|
Induction
|
VacuumFurnaces |
VacuumPumps
|
LeakDetectors
|
Testing
|
Salt
|
Miscellaneous
See something
you need, click on the link or scroll through all the items for sale.
Searching for something we don't have listed, fill out our
contact form.
Item
#VF183 Wellman 6 Bar Bottom
Load Vacuum Furnace. This is a 6 bar bottom loading vacuum furnace
built in 1988 by Wellman, maximum load weight is 2000 pounds at 2400F.
Working dimensions of 48" diameter x 54" high. Furnace is currently
installed but has only run one time since 2001. A few more details;
surveyed at +-10F at 2150F. Brand new Stokes 615 MHR. Rebuilt, never
run, Stokes 412 HII. Rebuilt Welch 1402. Rebuilt and cleaned Varian 18”
Diffusion pump. Controller, programmable Honeywell DCP 700. Televac II.
GE Series One PLC; Full ladder logic on floppy, CD, dedicated lap
top computer and hard copy ($5,000 new). Furnace has full manual, spare
part list, broken down operations procedures. Hot zone is useable but
does require a burnout. Electrical requirements. Vacuum at 2400F;
300KW, 480/60 Volts, 3PH, 60HZ, 360/2886 Amps. 395 KVA total
connected load (furnace has a Walker, VRT) Control cabinet; 120V, 1PH,
60 HZ. Water, 136 CuFt at 100CFM, 20 PSIG. Footprint: approx. 15Ft
x 15Ft x 25Ft high. Overall in very good condition. Price: 250,000 USD.
Overall in very good condition. Price: 250,000 USD.
 
Item #VF182
Ipsen Vacuum Furnace Load Cart for H5448-2 TurboTreater. Ipsen
Vacuum Furnace Load Cart, Manual with hydraulic lift, Fits Ipsen H5448 size
TurboTreater vacuum furnace (or ?), New, never used, (hydraulic jack
missing), Price: $3,500 Location: West Coast U.S
Item #VF181 Surface
Combustion 1Bar Vacuum Furnace. Model 1HVP-243618-2, 1980
vintage. Work zone of 24" wide x 36" deep x 18" high. Temperature 1200-2400F. Blower 30 HP. Upgraded
controls. The furnace is in excellent condition and currently used daily
for hardening tool steel. It will be offline mid August. It does need a new
hot zone. The shell was recently ultrasound tested and found to be in good
condition. Power requirements
170KW@480V
3PH 60Hz. Stokes mechanical pump with blower. Unit operated on a closed
loop cooling system. Graphite hot zone. Vendor cooled at 10-12 PSI.
Extras include replacement heating elements. Asking $35,000 USD.
_small.JPG)
_small.JPG)
_small.JPG)
Item
#VF180 Abar 3000ºF, All-Metal HR-20x24 Vacuum Furnace. 1981
Abar Model HR-20x24, 1-Bar Vacuum Furnace, Ser# BM-721, 3000°F Rating
(3050°F Short Term), All-metal 6-Layer Moly Hot Zone in good condition, Work
Zone: 18"W x 10"H x 24"D, (wider alternate work zone by raising hearth
level), Moly Elements and Moly Hearth, 400 lb Load Rating at 2400°F,
Honeywell DCP-551 upgraded temperature control (out of panel in photo),
Fredericks cold cathode/TC combination vacuum instrument, Honeywell
recorder(s), W-WRh control thermocouples, Single Owner since new, Design
Uniformity: +/- 10°F, Diffusion pumped with refrigerated cryotrap,
Varian/NRC Model HS-16 diffusion pump, Stokes Model 212MB mechanical pump
and blower pump package, vane-style holding pump, No gas-cooling fan or heat
exchanger (can be added at additional cost), 80 kVA VRT, heating power with
SCR rectifier, NEMA-12 Control Panel, Abar LT-20 Loader, Utilities: 115 kVA
total power, 220V/3ph/60Hz input power, Water requirement is 15 GPM at 60-90
PSI, 90°F min., 80-120 PSI Air, 25 SCF Nitrogen per cycle for backfill, OEM
Parts & Service still fully supported by Ipsen (Rockford, IL) 800-727-7625,
ext 253 Price: $98,500US (discount available if purchased before moved to
storage) Location: East Coast US
Item
#VF179 Ipsen VFC-321R Vacuum Furnace.
Ipsen Model VFC-321R Work Zone: 24”W x 36”D x 12”H Max.
Design Temperature (with current style hot zones): 2100F Hot Zone Condition:
Described as “good condition, almost as good as V1” (See above) Furnace was
running until just 4 months ago when removed to make room for a new one.
Operation was typically in the 1400-1650F range. Vacuum Pumps: 12” Varian
Diffusion Pump (Missing) Stokes 212H-11 Mechanical Pump with Gas Blower
(Stokes or Roots) is Missing Controls: Had been upgraded to computer based
controls, but computer, touch screen and PLC have been removed (were leased)
and are not included. Fenwal 921G Controller with Fenwal overtemp and Fenwal
Diffusion Pump Controller. We think all this needs is a temperature
controller to put it back into original Ipsen control configuration. All
relay logic is still in place. Current Status: Disassembled, Shrink wrapped
and ready for loading Approx. Shipping Weight: 17,000 lb. Price: $32,000US
(or buy both Item #VF178 and #VF179 together for a discounted package price)
Item
#VF178 Ipsen VFC-321 Vacuum Furnace. Ipsen
Model VFC-321R Work Zone: 24”W x 36”D x 12”H Max. Design Temperature (with
current style hot zones): 2100F Hot Zone Condition: Described as “excellent,
recently new” Hot zone was replaced and only had a few runs before this
furnace was put in mothballs for capacity reasons 3 years ago. Operation was
typically in the 1400-1650F range. Has been stored in place (indoors) and
still connected until just recently disassembled for removal. Vacuum Pumps:
12” Ipsen Diffusion Pump (removed from chamber for shipment) Stokes 212H-11
Mechanical Pump with Gas Blower (Stokes or Roots) Controls: Honeywell 7700
Temperature Control Current Status: Disassembled, Shrink wrapped and ready
for loading Approx. Shipping Weight: 17,000 lb. Asking Price: $45,000US (or
buy both Item #VF178 and #VF179 together for a discounted package price)
Item
#VF177 High-Temp Sintering Furnace. 2006 "The Furnace Source"
High-Temperature Sintering Furnace Barely Used - As New Condition 16" X 16"
X 31" Graphite Work Box Pallet full of Misc Graphite Trays for Production
Cold Wall Furnace Argon/Nitrogen Backfill Yokogawa Programmer to 2200 C Max
Rated Furnace Operating Temperature C-More Micro-Graphic Programming
Software DirectSOFT5 Programming Software Thermocouple Retractor and Optical
Pyrometer This vacuum furnace is capable of achieving low vacuum levels and
2200 C Temperature Equipped with mechanical vacuum pump and Roots blower
Graphite Heater Elements Operates at vacuum, partial pressure, or atmosphere
The furnace is designed to run in rough vacuum, partial pressure, or
atmosphere whereby all valves and controls are directed by the furnace's
PLC. Partial Pressure - 2 Torr Roughing Torr Setpoint - 1 Torr The "ding" in
the lower panel was caused by a rigger - it has since been repaired. Winner
Pays All Freight and Rigging Package Sold "AS IS". Asking Price:
$200,000US
Item #VF176
6-Bar
Vacuum Heat Treating Furnace. 1996 Vac Aero, 6-Bar Pressure
Quench Vacuum Heat Treating Furnace, Model # VAH 4848 MP6, Work Zone: 36"W x
48"D x 30"H, (Alternate load size by raising hearth: 48"W x 48"L x 22"H),
2400°F, 200 HP 10,000 CFM External Cooling Blower, 480V/3Phase/60Hz, 285kVA,
Hunterdon VRT Power Supply, 2,000,000 BTU/hr Gas Cool Heat Exchanger, Load
Rating: 2500 lb. at 2400°F, Vacuum Pumps: Stokes 412-11 with Roots 615RGS
Blower, Honeywell S9000 Temperature Controller with UDC3000 Hi-Limit,
Edwards AGC Vacuum Control. Currently still installed, but will be removed
for storage later in December. Removal costs will be added to price.
Includes water cooling system and Loader Price: $350,000US Location:
Midwestern U.S.
Item #VF175
Vac Aero Model HR-20 Vacuum Furnace. Work zone is 16 " wide x 12 "
high x 24 " long. Electrical 600 V,3 Ph, 60 Hz, 80 KVA. Gas quenching
pressure 5" Hg. New in 1978. Control System upgraded in 1993 includes AB
SLC500 PLC with Honeywell DCP-700 Programmer. PLC replaced in 2000. Hot Zone
upgraded in 1997. Included is a spare diffusion pump and spare parts valued
at $10,000. Currently installed and in excellent condition! Asking
$45,000.00
Item #VF174
CI Hayes Vacuum Oil Quench Furnace. Model VSQD091824, built in 1989.
Work zone is approximately 9" high x 18" wide x 24 " long. Capacity
approximately 200 pounds. Insulation is graphite, heating elements are solid
graphite. Maximum operating temperature is 2400 degree F. Hearth level is 48
1/2". Total power 75 KW, connected load 60 KW (heating chamber). Operating
range 500 microns. Voltage: 575v.
Footprint:
O/A Width: 12’-2”
O/A Depth: 14’-4” + 26” (Stationary roller table) + 30” (load
cart) = 19’-0”
Vessel Height: 3’-0” deep pit + 9’-0” above floor = 12’-0”
O/A Height (with piping and relief valve): 3’-0” deep pit =
11’-2” above floor = 14’-2”
Roller table and load cart heights (from floor with vessel
recessed 3’-0” into floor): 48.5”
Our room size: 19’-6” wide x 24’-0” deep
Min. comfortable room size: 16’-0” wide x 23’-0”
Load Cart: Yes, Gas Quenching: Yes
Furnace is currently installed. Overall this unit is in
excellent condition! Asking $60,000.00.
Item #VF172
Ipsen Bottom Loading Vacuum Furnace. Model VVFC(BL) 48X60(24)R. For
operating temperatures to 2400°F with inert gas partial pressures: Vacuum
Chamber - 76" diameter x 95" high, stainless steel with carbon steel water
jacket. Hot Zone - 48" diameter x 60" high, graphite element Graphite fiber
insulation 3,000 lbs. gross load at 2400°F Pumping System - Mechanical
booster pumping system not included 32" diameter, 32,000 l/s diffusion pump.
Power Supply - 450 kW, 460 volts, 3 phase, 60 Hertz, VRT. Cooling System -
40hp, recirculated inert gas at 700 torr. Control Instrumentation -
Honeywell DCP700 temperature controller - Honeywell DC300 overtemperature
limit Vacuum Instrumentation - Televac II - 2 station TC gauge. The OAL
(height) is currently at 22' 71/2". This could be modified or shortened by
2ft. Asking
Price: $50,000US
Item #VF169
Ipsen Model VFC-427-R. Built in 1966. Working dimensions of 24” X
36” X 12”. Operating temperature of 2400°F. 1 Bar Nitrogen quenching. The
hot zone has been removed for maintenance. Construction is Graphite board
with graphite rod elements but it will require work. Asking $10,000US
Item #VF168
Lindberg 2 Chamber Vacuum Furnace.
Working dimensions of 24” X 36” X
20”. Capable of both .85 Nitrogen quenching and oil quenching. Operating
temperature of 2150°F. Complete but in need of some work. Asking $10,000.00
Item #VF167
Ipsen Model VFC-321.
Built in 1966. Working dimensions of 24” X 36”
X 12”. Operating temperature of 2400°F. 1 Bar Nitrogen quenching. Hot zone
needs work. Asking $10,000.
Item #VF166
Surface Combustion Vacuum Furnace.
Working dimensions of 24” X 36” X
12”. 2400°F operating temperature. 1 Bar Nitrogen quenching. Asking
$10,000.00. Complete but will need hot zone repairs.
Item #VF154 Large Diameter
Crystal Growth Furnace based on
patented process.
Can be used as a large vacuum annealer. 12 foot
diameter by 16 foot tall. 2ea 20" diffusion pumps and pneumatic valves.
Comes complete with Allen Bradley Slick 500 control panel with ladder logic
controlling two each 120KW power loops manufactured by Spang Electronics.
All schematics included. Vacuum levels sustained at 0.5mmTorr at temps of
1600°C. Graphite resistive heaters used along with Polycarbon rigid felt
insulation. Asking Price: $110,000US
Item #VF144
CI Hayes Vacuum Oil Quench/Carburizing Furnace. Honeywell control
system. Working dimensions are 48" deep, 30" wide by 32" high. Equipped with
an automated vacuum carburizing system which was retrofitted approximately 5
years ago by CI Hayes. The voltage is 480V 60 Hz. The maximum hot zone
temperature is 2200deg F. It uses a 412/615 pumping system which is capable
of 8.0 X 10-3 Torr. The furnace includes two load carts and a batch gas
fired wash system. Furnace is in good operating condition and is currently
in heated indoor storage. S/N 16099 Asking $49,000CDN
|
.JPG)
.JPG)
.JPG)
